Adsorption dehumidifier HEYLO AT 30
The HEYLO AT 30 Adsorption Dehumidifier is a proven, robust and practical device for demanding and everyday use. It is ideal in water damage removal and in the industrial sector. The device has a highly efficient dehumidifying rotor made of silica gel. The dehumidification capacity is 26.4 litres/day at a relative humidity of 20°C/60%.
Adsorption dehumidifier HEYLO AT 30
The HEYLO AT 30 is a continuous dehumidifier with internal energy recovery that can reach very low dew points.
During the regeneration process, heat is absorbed by the rotor material. This heat is directed to the washing sector where the incoming regenerated air is preheated and its moisture content is reduced.
Although less heat is required to reach the final regeneration temperature, the air also has a much lower relative humidity.
The result is not only cooler blowing air, but also much drier air than other dehumidifiers.
USAGE
- In water damage restoration and industry
- Particularly suitable for achieving very low humidity
- Also applicable at low temperatures
FEATURES
- Energy saving with self-regulating PTC heater. PTC heating elements continuously adjust their temperature, and thus their power requirement, to the ambient conditions.
- Compact and robust housing (made of high quality steel)
- High dehumidification rate and long service life (SSCR rotor)
- Easy maintenance (SSCR rotor can be washed)
- Can be connected to side channel blowers
- Easy transport thanks to handle
- Very easy maintenance
- Can be equipped with hygrostat (humidity sensor)
Additional parameters
Category: | Adsorption dehumidifiers |
---|---|
Weight: | 17 kg |
Dehumidification rate (l/24 h) (30 °C / 80 % RH): | 26,4 |
Dry air quantity (m³/h) (for a density of 1.20 kg/m³, free blowing): | 360 |
Volume of moist air flow (m³/h) (for a density of 1.20 kg/m³, free blowing): | 75 |
Max. power consumption (kW): | 1,7 |
Fuse 230 V/50 Hz (A): | 10 |
Protective class (IP): | 54 |
Length (mm): | 422 |
Height (mm): | 350 |
Width (mm): | 410 |
Noise level (dB(A) / 3 m): | 50 |
Weight (kg): | 17 |
Pipe connection of dry + intake air (Ø in mm): | 125 |
Pipe connection for moist air (Ø in mm): | 80 |
Be the first who will post an article to this item!